Quick Answer: How Do I Activate TP Link?

How do I connect to my router for the first time?

Just follow these steps:Turn off your modem,Unplug the modem’s Ethernet cable from the PC,Connect that cable to the WAN or internet port on your new router,Power on your modem (wait for a minute or two),Next power on your router (wait for a minute or two),More items…•.

Please go to Wireless ->Security Settings page to check your security type. If it is WEP, you password usually is Key 1. If it is WPA-PSK/WPA2-PSK, you password should be PSK Password. If you have changed the password, please click the Save button.

With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.

Power on your router and computer first and then modem.Log into the router’s web-based management page. … Configure WAN Connection Type. … Enter your PPPoE username and password which are provided by your ISP.Click Save to save your settings, then the router will connect to Internet after a while.More items…•

How to configure my Range Extender via WPS button to extend an existing wireless network’s coverage?Plug your Range Extender into a power outlet near your main Router/AP.Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender. … The WPS process will last 2 minutes.More items…•

Advanced Preparations:Turn off your router,modem and computer.Connect your modem to the WAN port of the TP-Link router via an Ethernet cable;connect the main computer to TP-Link router’s LAN port via an Ethernet cable.Power on your router first, then the modem and computer.

How to configure my Range Extender via WPS button to extend an existing wireless network’s coverage?Plug your Range Extender into a power outlet near your main Router/AP.Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender. … The WPS process will last 2 minutes.More items…•

If you can access TP-Link login address correctly using the domain name or IP address, but fail to login using login username and password. … However, if the default credential cannot work, reset TP-Link device into default settings by pressing reset button for 10s if you have forgotten customized username and password.

Go to Settings > Status to view the Internet status of your extender. The extender runs normally. The extender fails to connect to the host networks. Please go to Settings > Wireless > Connect to Network to check the passwords of the host networks.

Usually, TP-LINK powerline adapters have three LED lights: First one stands for power; Second one stands for powerline connection; Third one stands for Ethernet connection.

1) Check the WLAN LED indicator on your wireless router/modem, and make sure it is on or flashing. Check Wi-Fi On/Off button and make sure Wi-Fi is enabled. 2) Check whether you have disable the SSID broadcast on your router. If Hide SSID is selected, you can’t find your networks any more.

Enter 192.168. 0.254 or http://192.168.0.254 in the internet browser address bar. Press the Enter key. The Admin login to TP Link wifi extender panel should open now.

The default wireless network of Range Extender is open, which can be found on the bottom label, no password needed; Below we take TL-WA850RE as an example. During/After the configuration: The wireless password of the Range extender is the same as the main router’s wireless password, which cannot be changed/customized.